J610g
Always Qdloader 9008 port
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_190210.extcsd
EMMC Init completed.
Get firmware version
Firmware info not found
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_190224.extcsd
EMMC Init completed.
Operation: Universal Factory Format
Please, wait ...
Successfully
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_190237.extcsd
EMMC Init completed.
Operation: MoviNand Format + Reset ...
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB
Sending Internal Reconfiguration Request... Waiting configuration Apply!
Restoring configuration...
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB
Wiping Card... Please do not touch it!
Successfully
Please don't forget to repair extCSD from backup!
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_190302.extcsd
EMMC Init completed.
Get firmware version
Firmware info not found
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_190902.extcsd
EMMC Init completed.
Opening file: SAMSUNG_SM-J610F_emmc_dump_ROM1_5GB_SAMSUNG_GX6BMB.bin
Analyzing Image: SAMSUNG_SM-J610F_emmc_dump_ROM1_5GB_SAMSUNG_GX6BMB.bin
Vendor: Samsung
Searching GPT ...
GPT header is found and is valid
GPT header successfully parsed
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_190908.extcsd
EMMC Init completed.
Opening file: SAMSUNG_SM-J610F_emmc_dump_ROM2_SAMSUNG_GX6BMB.bin
Analyzing Image: SAMSUNG_SM-J610F_emmc_dump_ROM2_SAMSUNG_GX6BMB.bin
Vendor: Samsung
Searching GPT ...
GPT header is not found
Searching PIT ...
PIT not found
Partition table not found
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_191042.extcsd
EMMC Init completed.
Operation: Writing all eMMC Regions...
Operation: Writing BootConfig ...
Reg: 179 Value: 0x38
Reg: 177 Value: 0x00
Reg: 162 Value: 0x01
Done
Writing to: ROM2 , start: 0x000000000000 , size: 0x000000400000
Filename: SAMSUNG_SM-J610F_emmc_dump_ROM2_SAMSUNG_GX6BMB.bin
eMMC switching to ROM2
Writing partition...
Done writing partition. Write speed: 1210,99 KB/s
Writing to: ROM3 , start: 0x000000000000 , size: 0x000000400000
Filename: SAMSUNG_SM-J610F_emmc_dump_ROM3_SAMSUNG_GX6BMB.bin
eMMC switching to ROM3
Writing partition...
Done writing partition. Write speed: 1202,41 KB/s
Writing to: ROM1 , start: 0x000000000000 , size: 0x000135000000
Filename: SAMSUNG_SM-J610F_emmc_dump_ROM1_5GB_SAMSUNG_GX6BMB.bin
eMMC switching to ROM1
Writing partition...
Done writing partition. Write speed: 4716,33 KB/s
All done time: [00:18:02:120]
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_192852.extcsd
EMMC Init completed.
Get firmware version
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_193326.extcsd
EMMC Init completed.
Opening file: CSC_OMC_OWO_J610GOWO3BSG1_CL15896691_QB24594050_RE V00_user_low_ship_MULTI_CERT.tar.md5
Unpacking PIT from CSC
Pit: J6PRIMELTE_SWA_OPEN.pit
Entry count: 57
The size of the last section has been updated
BL_J610GUBS3BSH3_CL15820665_QB25400521_REV00_user_ low_ship_MULTI_CERT.tar.md5
The list of files in the firmware:
aboot.mbn.lz4
sbl1.mbn.lz4
rpm.mbn.lz4
tz.mbn.lz4
devcfg.mbn.lz4
cmnlib.mbn.lz4
keymaster.mbn.lz4
apdp.mbn.lz4
msadp.mbn.lz4
non-hlos.bin.lz4
lksecapp.mbn.lz4
sec.dat.lz4
AP_J610GUBS3BSH3_CL15820665_QB25400521_REV00_user_ low_ship_MULTI_CERT_meta_OS9.tar.md5
The list of files in the firmware:
boot.img.lz4
recovery.img.lz4
vendor.img.ext4.lz4
system.img.ext4.lz4
persist.img.ext4.lz4
userdata.img.ext4.lz4
meta-data/
meta-data/fota.zip
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_193517.extcsd
EMMC Init completed.
Operation: Write by vendor (Samsung)
Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Writing BackupGPT at address: 000747BFBE00
Writing PIT at address: 000000004400
GPT-partitioning done
Unpacking file: sbl1.mbn
Unpacking Lz4: sbl1.mbn.lz4
Unpacking file: aboot.mbn
Unpacking Lz4: aboot.mbn.lz4
Unpacking file: rpm.mbn
Unpacking Lz4: rpm.mbn.lz4
Unpacking file: tz.mbn
Unpacking Lz4: tz.mbn.lz4
Unpacking file: devcfg.mbn
Unpacking Lz4: devcfg.mbn.lz4
Unpacking file: sec.dat
Unpacking Lz4: sec.dat.lz4
Unpacking file: keymaster.mbn
Unpacking Lz4: keymaster.mbn.lz4
Unpacking file: cmnlib.mbn
Unpacking Lz4: cmnlib.mbn.lz4
Unpacking file: lksecapp.mbn
Unpacking Lz4: lksecapp.mbn.lz4
Unpacking file: apdp.mbn
Unpacking Lz4: apdp.mbn.lz4
Unpacking file: msadp.mbn
Unpacking Lz4: msadp.mbn.lz4
Unpacking file: boot.img
Unpacking Lz4: boot.img.lz4
Unpacking file: non-hlos.bin
Unpacking Lz4: non-hlos.bin.lz4
Unpacking file: userdata.img.ext4
Unpacking Lz4: userdata.img.ext4.lz4
Partition name: SBL1
Filename: sbl1.mbn , Offset: 000000400000 , filesize: 382840 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 1566,01 KB/s
Partition name: ABOOT
Filename: aboot.mbn , Offset: 000000510000 , filesize: 1319068 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3713,87 KB/s
Partition name: RPM
Filename: rpm.mbn , Offset: 000000710000 , filesize: 218912 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 1710,36 KB/s
Partition name: TZ
Filename: tz.mbn , Offset: 000000790000 , filesize: 1548032 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 4405,81 KB/s
Partition name: DEVCFG
Filename: devcfg.mbn , Offset: 000000A10000 , filesize: 94988 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 926,78 KB/s
Partition name: SEC
Filename: sec.dat , Offset: 000000D50000 , filesize: 948 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 29,78 KB/s
Partition name: KEYMASTER
Filename: keymaster.mbn , Offset: 000000D54000 , filesize: 259288 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 2830,31 KB/s
Partition name: CMNLIB
Filename: cmnlib.mbn , Offset: 000000DD4000 , filesize: 238752 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3032,44 KB/s
Partition name: LKSECAPP
Filename: lksecapp.mbn , Offset: 000000E54000 , filesize: 279416 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 4033,58 KB/s
Partition name: APDP
Filename: apdp.mbn , Offset: 000000ED4000 , filesize: 46528 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 388,91 KB/s
Partition name: MDSAP
Filename: msadp.mbn , Offset: 000000F14000 , filesize: 46528 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 1036,18 KB/s
Partition name: BOOT
Filename: boot.img , Offset: 000002E00000 , filesize: 15774224 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 4904,63 KB/s
Partition name: APNHLOS
Filename: non-hlos.bin , Offset: 000012300000 , filesize: 35674112 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 4738,14 KB/s
Partition name: USERDATA
Filename: userdata.img.ext4 , Offset: 000127400000 , filesize: 1131864452 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 30
Done writing partition. Write speed: 4870,04 KB/s
Partition EFS : formatting as EXT4. Please wait ...
Formatting completed
Partition CACHE : formatting as EXT4. Please wait ...
Formatting completed
Partition HIDDEN : formatting as EXT4. Please wait ...
Formatting completed
Operation: Writing BootConfig ...
Reg: 179 Value: 0x38
Reg: 177 Value: 0x00
Reg: 162 Value: 0x01
Done
All done time: [00:09:05:791]
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_194452.extcsd
EMMC Init completed.
Always Qdloader 9008 port
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_190210.extcsd
EMMC Init completed.
Get firmware version
Firmware info not found
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_190224.extcsd
EMMC Init completed.
Operation: Universal Factory Format
Please, wait ...
Successfully
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_190237.extcsd
EMMC Init completed.
Operation: MoviNand Format + Reset ...
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB
Sending Internal Reconfiguration Request... Waiting configuration Apply!
Restoring configuration...
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB
Wiping Card... Please do not touch it!
Successfully
Please don't forget to repair extCSD from backup!
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_190302.extcsd
EMMC Init completed.
Get firmware version
Firmware info not found
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_190902.extcsd
EMMC Init completed.
Opening file: SAMSUNG_SM-J610F_emmc_dump_ROM1_5GB_SAMSUNG_GX6BMB.bin
Analyzing Image: SAMSUNG_SM-J610F_emmc_dump_ROM1_5GB_SAMSUNG_GX6BMB.bin
Vendor: Samsung
Searching GPT ...
GPT header is found and is valid
GPT header successfully parsed
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_190908.extcsd
EMMC Init completed.
Opening file: SAMSUNG_SM-J610F_emmc_dump_ROM2_SAMSUNG_GX6BMB.bin
Analyzing Image: SAMSUNG_SM-J610F_emmc_dump_ROM2_SAMSUNG_GX6BMB.bin
Vendor: Samsung
Searching GPT ...
GPT header is not found
Searching PIT ...
PIT not found
Partition table not found
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_191042.extcsd
EMMC Init completed.
Operation: Writing all eMMC Regions...
Operation: Writing BootConfig ...
Reg: 179 Value: 0x38
Reg: 177 Value: 0x00
Reg: 162 Value: 0x01
Done
Writing to: ROM2 , start: 0x000000000000 , size: 0x000000400000
Filename: SAMSUNG_SM-J610F_emmc_dump_ROM2_SAMSUNG_GX6BMB.bin
eMMC switching to ROM2
Writing partition...
Done writing partition. Write speed: 1210,99 KB/s
Writing to: ROM3 , start: 0x000000000000 , size: 0x000000400000
Filename: SAMSUNG_SM-J610F_emmc_dump_ROM3_SAMSUNG_GX6BMB.bin
eMMC switching to ROM3
Writing partition...
Done writing partition. Write speed: 1202,41 KB/s
Writing to: ROM1 , start: 0x000000000000 , size: 0x000135000000
Filename: SAMSUNG_SM-J610F_emmc_dump_ROM1_5GB_SAMSUNG_GX6BMB.bin
eMMC switching to ROM1
Writing partition...
Done writing partition. Write speed: 4716,33 KB/s
All done time: [00:18:02:120]
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_192852.extcsd
EMMC Init completed.
Get firmware version
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_193326.extcsd
EMMC Init completed.
Opening file: CSC_OMC_OWO_J610GOWO3BSG1_CL15896691_QB24594050_RE V00_user_low_ship_MULTI_CERT.tar.md5
Unpacking PIT from CSC
Pit: J6PRIMELTE_SWA_OPEN.pit
Entry count: 57
The size of the last section has been updated
BL_J610GUBS3BSH3_CL15820665_QB25400521_REV00_user_ low_ship_MULTI_CERT.tar.md5
The list of files in the firmware:
aboot.mbn.lz4
sbl1.mbn.lz4
rpm.mbn.lz4
tz.mbn.lz4
devcfg.mbn.lz4
cmnlib.mbn.lz4
keymaster.mbn.lz4
apdp.mbn.lz4
msadp.mbn.lz4
non-hlos.bin.lz4
lksecapp.mbn.lz4
sec.dat.lz4
AP_J610GUBS3BSH3_CL15820665_QB25400521_REV00_user_ low_ship_MULTI_CERT_meta_OS9.tar.md5
The list of files in the firmware:
boot.img.lz4
recovery.img.lz4
vendor.img.ext4.lz4
system.img.ext4.lz4
persist.img.ext4.lz4
userdata.img.ext4.lz4
meta-data/
meta-data/fota.zip
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_193517.extcsd
EMMC Init completed.
Operation: Write by vendor (Samsung)
Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Writing BackupGPT at address: 000747BFBE00
Writing PIT at address: 000000004400
GPT-partitioning done
Unpacking file: sbl1.mbn
Unpacking Lz4: sbl1.mbn.lz4
Unpacking file: aboot.mbn
Unpacking Lz4: aboot.mbn.lz4
Unpacking file: rpm.mbn
Unpacking Lz4: rpm.mbn.lz4
Unpacking file: tz.mbn
Unpacking Lz4: tz.mbn.lz4
Unpacking file: devcfg.mbn
Unpacking Lz4: devcfg.mbn.lz4
Unpacking file: sec.dat
Unpacking Lz4: sec.dat.lz4
Unpacking file: keymaster.mbn
Unpacking Lz4: keymaster.mbn.lz4
Unpacking file: cmnlib.mbn
Unpacking Lz4: cmnlib.mbn.lz4
Unpacking file: lksecapp.mbn
Unpacking Lz4: lksecapp.mbn.lz4
Unpacking file: apdp.mbn
Unpacking Lz4: apdp.mbn.lz4
Unpacking file: msadp.mbn
Unpacking Lz4: msadp.mbn.lz4
Unpacking file: boot.img
Unpacking Lz4: boot.img.lz4
Unpacking file: non-hlos.bin
Unpacking Lz4: non-hlos.bin.lz4
Unpacking file: userdata.img.ext4
Unpacking Lz4: userdata.img.ext4.lz4
Partition name: SBL1
Filename: sbl1.mbn , Offset: 000000400000 , filesize: 382840 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 1566,01 KB/s
Partition name: ABOOT
Filename: aboot.mbn , Offset: 000000510000 , filesize: 1319068 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3713,87 KB/s
Partition name: RPM
Filename: rpm.mbn , Offset: 000000710000 , filesize: 218912 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 1710,36 KB/s
Partition name: TZ
Filename: tz.mbn , Offset: 000000790000 , filesize: 1548032 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 4405,81 KB/s
Partition name: DEVCFG
Filename: devcfg.mbn , Offset: 000000A10000 , filesize: 94988 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 926,78 KB/s
Partition name: SEC
Filename: sec.dat , Offset: 000000D50000 , filesize: 948 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 29,78 KB/s
Partition name: KEYMASTER
Filename: keymaster.mbn , Offset: 000000D54000 , filesize: 259288 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 2830,31 KB/s
Partition name: CMNLIB
Filename: cmnlib.mbn , Offset: 000000DD4000 , filesize: 238752 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3032,44 KB/s
Partition name: LKSECAPP
Filename: lksecapp.mbn , Offset: 000000E54000 , filesize: 279416 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 4033,58 KB/s
Partition name: APDP
Filename: apdp.mbn , Offset: 000000ED4000 , filesize: 46528 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 388,91 KB/s
Partition name: MDSAP
Filename: msadp.mbn , Offset: 000000F14000 , filesize: 46528 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 1036,18 KB/s
Partition name: BOOT
Filename: boot.img , Offset: 000002E00000 , filesize: 15774224 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 4904,63 KB/s
Partition name: APNHLOS
Filename: non-hlos.bin , Offset: 000012300000 , filesize: 35674112 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 4738,14 KB/s
Partition name: USERDATA
Filename: userdata.img.ext4 , Offset: 000127400000 , filesize: 1131864452 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 30
Done writing partition. Write speed: 4870,04 KB/s
Partition EFS : formatting as EXT4. Please wait ...
Formatting completed
Partition CACHE : formatting as EXT4. Please wait ...
Formatting completed
Partition HIDDEN : formatting as EXT4. Please wait ...
Formatting completed
Operation: Writing BootConfig ...
Reg: 179 Value: 0x38
Reg: 177 Value: 0x00
Reg: 162 Value: 0x01
Done
All done time: [00:09:05:791]
Setting interface to EasyJtag2/E-Socket
Setting bus width to 1 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100475836424D42003FE49A5295B3
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GX6BMB , HEX: 475836424D42 , S/N: 3FE49A52 , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 9/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 81 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GX6BMB_3FE49A52_20190924_194452.extcsd
EMMC Init completed.
from GSM-Forum https://ift.tt/2lvuYow
via IFTTT
No comments:
Post a Comment