A previous flashing with same files, same phone was Ok. System goes down again so I make Full Format + Flash and now when I flash always
got this message when I'm flashing at 99%: [6128]Error: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG
Could you help me?
LOGS:
Flash files count is :10
Action : Firmware update.
Selected Model: 0-By CPU: MT6580
Exe version: NCKDongle AndroidMTK 2.5.9.9
Scenario: [1]Full Flash
Will be used loader: DA_SWSEC_.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM21)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM135)
Backup preloader saved in firmware directory.
[2]FORMAT - BEGIN: 0x1c80000 - LEN: 0x40000
[2]FORMAT - BEGIN: 0x50a0000 - LEN: 0x2000000
[2]FORMAT - BEGIN: 0xca000000 - LEN: 0x10000000
[2]FORMAT - BEGIN: 0xca000000 - LEN: 0x10000000
[2]FORMAT - BEGIN: 0xda000000 - LEN: 0xf6f80000
Starting flash.
Send preloader...
[6128]Error: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG
Wait untill phone will start charging.
[0]All done.
thanks in advance
got this message when I'm flashing at 99%: [6128]Error: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG
Could you help me?
LOGS:
Flash files count is :10
Action : Firmware update.
Selected Model: 0-By CPU: MT6580
Exe version: NCKDongle AndroidMTK 2.5.9.9
Scenario: [1]Full Flash
Will be used loader: DA_SWSEC_.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM21)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM135)
Backup preloader saved in firmware directory.
[2]FORMAT - BEGIN: 0x1c80000 - LEN: 0x40000
[2]FORMAT - BEGIN: 0x50a0000 - LEN: 0x2000000
[2]FORMAT - BEGIN: 0xca000000 - LEN: 0x10000000
[2]FORMAT - BEGIN: 0xca000000 - LEN: 0x10000000
[2]FORMAT - BEGIN: 0xda000000 - LEN: 0xf6f80000
Starting flash.
Send preloader...
[6128]Error: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG
Wait untill phone will start charging.
[0]All done.
thanks in advance
from GSM-Forum https://ift.tt/2ZuDgzY
via IFTTT
No comments:
Post a Comment