Nokia TA-1114 flashing error

This phone is hang on logo, I'm trying to flash it but it fails.

Read info log.

Code:

---

Operation : Identify [ v1.15 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM144)
MODE : NOKIA USB SERIAL
PORT : 144
BROM : Init BROM
BROM init passed!
    CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : AF991752D09BBC5E10D1EF478F10C1EB
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : NEMO61D.10.00.11.p2
FLASH : 00C2 : 0025 : 0036 : 0000
PRDC : 059Z0X8
IMEI[1] : 354176109763524
IMEI[2] : 354182100843521
NCK  : 20 digits
PROV : 24407000

Saved as  : 3541xxxxxxx.mtsec
Saved to  : C:\InfinityBox\BEST2\Backup\


Done!
Elapsed: 00:00:34

Reconnect Power/Cable!

---

Read firmware log.

Code:

---

Operation : Read FirmWare [ v1.15 ]

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM144)
MODE : NOKIA USB SERIAL
PORT : 144
BROM : Init BROM
BROM init passed!
    CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : AF991752D09BBC5E10D1EF478F10C1EB
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003

Boot done!

SWVer : NEMO61D.10.00.11.p2
FLASH : 00C2 : 0025 : 0036 : 0000
CODE  : 0x00370000
Reading Flash ...
TDSN : TA-1114
PRDC : 059Z0X8
PPM  : IE
LANG :
[1] : Arabic (Saudi Arabia)
[2] : Portuguese (Portugal)
[3] : French (France)
[4] : English (United Kingdom)

BUILD : TA-1114_ROM_eMP_10.00.11
BUILD : TA-1114_LANG_PACK_ROM_IE_eMP_10.00.11_001
BUILD : TA-1114_CUSTPACK_ROM_IE_eMP_10.00.11_001
BUILD : TA-1114_JUMP_TABLE_IE_eMP_10.00.11_001
BUILD : TA-1114_VIVA_eMP_10.00.11

Make VPL definition

Save Path : C:\Users\Lee\Desktop\Passcode\TA-1114\
Save Name : TA-1114_059Z0X8_10.00.11.vpl

Build Finished!

Done!
Elapsed: 00:02:51

Reconnect Power/Cable!

---

Flashing log

Code:

---

Operation : Write FirmWare [ v1.15 ]
Setting  : UserData erase : True
Setting  : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM144)
MODE : NOKIA USB SERIAL
PORT : 144
BROM : Init BROM
BROM init passed!
    CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : AF991752D09BBC5E10D1EF478F10C1EB
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : NEMO61D.10.00.11.p2
    BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

        NOR: 00C8 : 0060 : 0016 : 0000
        NOR: [GigaDevice] GD25LQ32
        NOR:
              TSIZE  : 0x00400000 [ 4.00 MB ]
              PSIZE  : 0x00400000 [ 4.00 MB ]
              STYPE  : 0x00000000
              FLOTP  : DA_NOR_OTP_EXIST

 STATUS : OK
 BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion  : 10.00.11 [TA-1114]
DEV SoftwareVersion  : 10.00.11
SWInfo compare result : SAME

Load FlashSet :
MROM : TA-1114_ROM_eMP_10.00.11
LANG : TA-1114_LANG_PACK_ROM_IJ_eMP_10.00.11_001
CUST : TA-1114_CUSTPACK_ROM_IJ_eMP_10.00.11_001
JUMP : TA-1114_JUMP_TABLE_IJ_eMP_10.00.11_001
VIVA : TA-1114_VIVA_eMP_10.00.11

Prepare FlashSet :
DCR : TA-1114_ROM_eMP_10.00.11
DCR : TA-1114_LANG_PACK_ROM_IJ_eMP_10.00.11_001
DCR : TA-1114_CUSTPACK_ROM_IJ_eMP_10.00.11_001
DCR : TA-1114_JUMP_TABLE_IJ_eMP_10.00.11_001
DCR : TA-1114_VIVA_eMP_10.00.11

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000
FFS Format ERROR : DA_NOR_BLOCK_DATA_UNSTABLE
Open_SFStorage ERROR : DA_NOR_BLOCK_IS_LOCKED

Unknow Error!
Make sure device HW is in normal condition, check battery and cable!

Reconnect Power/Cable!

---

Flashing langPack only log.

Code:

---

Operation : Write FirmWare [ v1.15 ]
Setting  : UserData erase : False
Setting  : LangPack Only : True

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM144)
MODE : NOKIA USB SERIAL
PORT : 144
BROM : Init BROM
BROM init passed!
    CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : AF991752D09BBC5E10D1EF478F10C1EB
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : NEMO61D.10.00.11.p2
    BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

        NOR: 00C8 : 0060 : 0016 : 0000
        NOR: [GigaDevice] GD25LQ32
        NOR:
              TSIZE  : 0x00400000 [ 4.00 MB ]
              PSIZE  : 0x00400000 [ 4.00 MB ]
              STYPE  : 0x00000000
              FLOTP  : DA_NOR_OTP_EXIST

 STATUS : OK
 BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion  : 10.00.11 [TA-1114]
DEV SoftwareVersion  : 10.00.11
SWInfo compare result : SAME

Load FlashSet :
LANG : TA-1114_LANG_PACK_ROM_IJ_eMP_10.00.11_001
CUST : TA-1114_CUSTPACK_ROM_IJ_eMP_10.00.11_001
JUMP : TA-1114_JUMP_TABLE_IJ_eMP_10.00.11_001

Prepare FlashSet :
DCR : TA-1114_LANG_PACK_ROM_IJ_eMP_10.00.11_001
DCR : TA-1114_CUSTPACK_ROM_IJ_eMP_10.00.11_001
DCR : TA-1114_JUMP_TABLE_IJ_eMP_10.00.11_001

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1114_LANG_PACK_ROM_IJ_eMP_10.00.11_001
Write : TA-1114_CUSTPACK_ROM_IJ_eMP_10.00.11_001
Write : TA-1114_JUMP_TABLE_IJ_eMP_10.00.11_001
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1114_LANG_PACK_ROM_IJ_eMP_10.00.11_001
Verify : TA-1114_CUSTPACK_ROM_IJ_eMP_10.00.11_001
Verify : TA-1114_JUMP_TABLE_IJ_eMP_10.00.11_001

Done!
Elapsed: 00:00:33

Reconnect Power/Cable!

---

Log after select langpack only

Code:

---

Infinity-Box BEST Nokia [HMD] Module [NK2] v1.15


Open VPLfile : TA-1114_059Z0X8_10.00.11.vpl
Description  : TA-1114 IJ
DeviceType  : TA-1114
ProductCode  : 059Z0X8
SoftwareVer  : 10.00.11
PPM LangPack :
[1] : Urdu (Islamic Republic of Pakistan)
[2] : English (United Kingdom)
Load Ok!

Operation : Write FirmWare [ v1.15 ]
Setting  : UserData erase : False
Setting  : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM144)
MODE : NOKIA USB SERIAL
PORT : 144
BROM : Init BROM
BROM init passed!
    CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : AF991752D09BBC5E10D1EF478F10C1EB
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : NEMO61D.10.00.11.p2
    BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

        NOR: 00C8 : 0060 : 0016 : 0000
        NOR: [GigaDevice] GD25LQ32
        NOR:
              TSIZE  : 0x00400000 [ 4.00 MB ]
              PSIZE  : 0x00400000 [ 4.00 MB ]
              STYPE  : 0x00000000
              FLOTP  : DA_NOR_OTP_EXIST

 STATUS : OK
 BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion  : 10.00.11 [TA-1114]
DEV SoftwareVersion  : 10.00.11
SWInfo compare result : SAME

Load FlashSet :
MROM : TA-1114_ROM_eMP_10.00.11
LANG : TA-1114_LANG_PACK_ROM_IJ_eMP_10.00.11_001
CUST : TA-1114_CUSTPACK_ROM_IJ_eMP_10.00.11_001
JUMP : TA-1114_JUMP_TABLE_IJ_eMP_10.00.11_001
VIVA : TA-1114_VIVA_eMP_10.00.11

Prepare FlashSet :
DCR : TA-1114_ROM_eMP_10.00.11
DCR : TA-1114_LANG_PACK_ROM_IJ_eMP_10.00.11_001
DCR : TA-1114_CUSTPACK_ROM_IJ_eMP_10.00.11_001
DCR : TA-1114_JUMP_TABLE_IJ_eMP_10.00.11_001
DCR : TA-1114_VIVA_eMP_10.00.11

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1114_ROM_eMP_10.00.11
Write : TA-1114_LANG_PACK_ROM_IJ_eMP_10.00.11_001
Write : TA-1114_CUSTPACK_ROM_IJ_eMP_10.00.11_001
Write : TA-1114_JUMP_TABLE_IJ_eMP_10.00.11_001
Write : TA-1114_VIVA_eMP_10.00.11
Write done, waiting target response ...
Flash_FinWrite ERROR : DA_CBR_NOT_FOUND

Error : Flashing failed!
Make sure device HW is in normal condition, check battery and cable!

Reconnect Power/Cable!

---

Is there any solution for this phone?

from GSM-Forum http://bit.ly/2V0xA9J
via IFTTT