G532f Dead boot

I got one G532f i flashed it and it became dead. i use jtag and repair it but still dead... can someone explain me how to do it.
it now showing download mode and not switching on.

i even write all fies but same


here is log....

4/28/2019 9:22:26 AM>
4/28/2019 9:22:26 AM> eMMC_tool Suite ver. 1.5.3.0 (release date: 28.12.2018)
4/28/2019 9:22:27 AM> Microsoft Windows 7 (32 bit) build 7601 (6.1.7601.18015)
4/28/2019 9:22:27 AM>
4/28/2019 9:22:27 AM> Looking for EasyJTAG box...
4/28/2019 9:22:27 AM> EasyJTAG API ver. 2201
4/28/2019 9:22:28 AM> OpenUSB returned = 0
4/28/2019 9:22:28 AM> EasyJTAG Box Serial =
4/28/2019 9:22:29 AM> Card Serial =
4/28/2019 9:22:29 AM> EasyJTAG Box Firmware = 2.31
4/28/2019 9:22:29 AM>
4/28/2019 9:23:05 AM> Looking for EasyJTAG box...
4/28/2019 9:23:05 AM> EasyJTAG API ver. 2201
4/28/2019 9:23:05 AM> Setting IO Levels to 1.8V
4/28/2019 9:23:05 AM> Setting frequence to 36 Mhz
4/28/2019 9:23:05 AM> EasyJTAG Box Serial = 553E579F73FF53EF
4/28/2019 9:23:05 AM> EasyJTAG Box Firmware = 2.31
4/28/2019 9:23:05 AM> Setting interface to EasyJtag2/ISP_HiPower
4/28/2019 9:23:05 AM> Setting bus width to 1 Bit
4/28/2019 9:23:05 AM> HiPower mode is ON
4/28/2019 9:23:05 AM> Setting frequence to 36 Mhz
4/28/2019 9:23:05 AM> CMD Pullup Level: 1715 mV
4/28/2019 9:23:05 AM> CMD Active Level: 1857 mV
4/28/2019 9:23:06 AM> eMMC Init returned = 0
4/28/2019 9:23:06 AM> EMMC Device Information :
4/28/2019 9:23:06 AM> EMMC CID: 90014A48384734759201C2B6C8143505
4/28/2019 9:23:06 AM> EMMC CSD: D02701320F5903FFFFFFFFE78A40002B
4/28/2019 9:23:06 AM> EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: C2B6C814 , rev. 0x01
4/28/2019 9:23:06 AM> EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 3/2018
4/28/2019 9:23:06 AM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
4/28/2019 9:23:06 AM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
4/28/2019 9:23:06 AM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
4/28/2019 9:23:06 AM> EMMC Permanent Write Protection: No
4/28/2019 9:23:06 AM> EMMC Temporary Write Protection: No
4/28/2019 9:23:06 AM> Extended CSD Information :
4/28/2019 9:23:06 AM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
4/28/2019 9:23:06 AM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
4/28/2019 9:23:06 AM> Boot Bus Config: 0x00 , width 1bit
4/28/2019 9:23:06 AM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
4/28/2019 9:23:06 AM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
4/28/2019 9:23:06 AM> Device supports partitioning features
4/28/2019 9:23:06 AM> Device can have enhanced technological features in partitions and user data area
4/28/2019 9:23:06 AM> Device can have extended partitions attribute
4/28/2019 9:23:06 AM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
4/28/2019 9:23:06 AM> Backup saved: H8G4u_C2B6C814_20190428_092306.extcsd
4/28/2019 9:23:06 AM> EMMC Init completed.
4/28/2019 9:23:06 AM>
4/28/2019 9:23:06 AM> Opening file: N:\Z3x\G532F\GRANDPPLTE_CIS_SER.pit
4/28/2019 9:23:06 AM>
4/28/2019 9:23:06 AM> Pit: GRANDPPLTE_CIS_SER.pit
4/28/2019 9:23:06 AM> Entry count: 34
4/28/2019 9:23:06 AM>
4/28/2019 9:23:06 AM> The size of the last section has been updated
4/28/2019 9:23:17 AM> Selected file: N:\Z3x\G532F\G532FXWU1APJ1_G532FOJV1APJ2_XFV\BL_G5 32FXWU1APJ1_CL9364647_QB11085301_REV00_user_low_sh ip_MULTI_CERT.tar.md5
4/28/2019 9:23:17 AM>
4/28/2019 9:23:17 AM> BL_G532FXWU1APJ1_CL9364647_QB11085301_REV00_user_l ow_ship_MULTI_CERT.tar.md5
4/28/2019 9:23:17 AM> The list of files in the firmware:
4/28/2019 9:23:17 AM> preloader.img
4/28/2019 9:23:17 AM> lk.bin
4/28/2019 9:23:18 AM> param.bin
4/28/2019 9:23:18 AM> trustzone.bin
4/28/2019 9:23:18 AM> efuse.img
4/28/2019 9:23:18 AM>
4/28/2019 9:24:54 AM> Looking for EasyJTAG box...
4/28/2019 9:24:54 AM> EasyJTAG API ver. 2201
4/28/2019 9:24:54 AM> Setting IO Levels to 1.8V
4/28/2019 9:24:54 AM> Setting frequence to 36 Mhz
4/28/2019 9:24:54 AM> EasyJTAG Box Serial = 553E579F73FF53EF
4/28/2019 9:24:54 AM> EasyJTAG Box Firmware = 2.31
4/28/2019 9:24:55 AM> Setting interface to EasyJtag2/ISP_HiPower
4/28/2019 9:24:55 AM> Setting bus width to 1 Bit
4/28/2019 9:24:55 AM> HiPower mode is ON
4/28/2019 9:24:55 AM> Setting frequence to 36 Mhz
4/28/2019 9:24:55 AM> CMD Pullup Level: 1713 mV
4/28/2019 9:24:55 AM> CMD Active Level: 1857 mV
4/28/2019 9:24:55 AM> eMMC Init returned = 0
4/28/2019 9:24:55 AM> EMMC Device Information :
4/28/2019 9:24:55 AM> EMMC CID: 90014A48384734759201C2B6C8143505
4/28/2019 9:24:55 AM> EMMC CSD: D02701320F5903FFFFFFFFE78A40002B
4/28/2019 9:24:55 AM> EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: C2B6C814 , rev. 0x01
4/28/2019 9:24:55 AM> EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 3/2018
4/28/2019 9:24:55 AM> EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
4/28/2019 9:24:55 AM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
4/28/2019 9:24:55 AM> EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
4/28/2019 9:24:55 AM> EMMC Permanent Write Protection: No
4/28/2019 9:24:55 AM> EMMC Temporary Write Protection: No
4/28/2019 9:24:55 AM> Extended CSD Information :
4/28/2019 9:24:55 AM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
4/28/2019 9:24:55 AM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
4/28/2019 9:24:55 AM> Boot Bus Config: 0x00 , width 1bit
4/28/2019 9:24:55 AM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
4/28/2019 9:24:55 AM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
4/28/2019 9:24:55 AM> Device supports partitioning features
4/28/2019 9:24:55 AM> Device can have enhanced technological features in partitions and user data area
4/28/2019 9:24:55 AM> Device can have extended partitions attribute
4/28/2019 9:24:55 AM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
4/28/2019 9:24:55 AM> Backup saved: H8G4u_C2B6C814_20190428_092455.extcsd
4/28/2019 9:24:55 AM> EMMC Init completed.
4/28/2019 9:24:55 AM>
4/28/2019 9:24:55 AM> Operation: Write by vendor (Samsung)
4/28/2019 9:24:55 AM>
4/28/2019 9:24:55 AM> Creating GPT-partitioninig
4/28/2019 9:24:55 AM> Writing PrimaryGPT at address: 000000000000
4/28/2019 9:24:55 AM> Writing BackupGPT at address: 0001D1FFBE00
4/28/2019 9:24:55 AM> Writing PIT at address: 000000004400
4/28/2019 9:24:56 AM> GPT-partitioning done
4/28/2019 9:24:56 AM>
4/28/2019 9:24:56 AM> Unpacking file: preloader.img
4/28/2019 9:24:56 AM> Unpacking file: lk.bin
4/28/2019 9:24:56 AM> Unpacking file: efuse.img
4/28/2019 9:24:56 AM> Unpacking file: trustzone.bin
4/28/2019 9:24:56 AM> Unpacking file: param.bin
4/28/2019 9:24:56 AM>
4/28/2019 9:24:56 AM> Partition name: BOOTLOADER
4/28/2019 9:24:56 AM> Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
4/28/2019 9:24:56 AM> eMMC switching to ROM2
4/28/2019 9:24:56 AM> Erasing partition...
4/28/2019 9:25:01 AM> Writing partition...
4/28/2019 9:25:01 AM> Done writing partition. Write speed: 563.41 KB/s
4/28/2019 9:25:01 AM> Partition name: LK
4/28/2019 9:25:01 AM> Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
4/28/2019 9:25:01 AM> eMMC switching to ROM1
4/28/2019 9:25:01 AM> Erasing partition...
4/28/2019 9:25:02 AM> Writing partition...
4/28/2019 9:25:03 AM> Done writing partition. Write speed: 1997.60 KB/s
4/28/2019 9:25:03 AM> Partition name: EFUSE
4/28/2019 9:25:03 AM> Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
4/28/2019 9:25:03 AM> eMMC switching to ROM1
4/28/2019 9:25:03 AM> Erasing partition...
4/28/2019 9:25:04 AM> Writing partition...
4/28/2019 9:25:04 AM> Done writing partition. Write speed: 29.93 KB/s
4/28/2019 9:25:04 AM> Partition name: TEE1
4/28/2019 9:25:04 AM> Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
4/28/2019 9:25:04 AM> eMMC switching to ROM1
4/28/2019 9:25:04 AM> Erasing partition...
4/28/2019 9:25:05 AM> Writing partition...
4/28/2019 9:25:05 AM> Done writing partition. Write speed: 3016.48 KB/s
4/28/2019 9:25:05 AM> Partition name: PARAM
4/28/2019 9:25:05 AM> Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
4/28/2019 9:25:05 AM> eMMC switching to ROM1
4/28/2019 9:25:05 AM> Erasing partition...
4/28/2019 9:25:06 AM> Writing partition...
4/28/2019 9:25:06 AM> Done writing partition. Write speed: 3691.43 KB/s
4/28/2019 9:25:06 AM>
4/28/2019 9:25:07 AM> Check BootConfig for the selected vendor
4/28/2019 9:25:07 AM>
4/28/2019 9:25:07 AM> All done time: [00:00:10:660]
4/28/2019 9:25:07 AM>


and also i want to know how to use this fie.

Samsung_SM-G532F_Boot_Repair_File_For_EasyJtag_PLUS_File_Make _By_Yash_Mobile_Banswara_Rajasthan

from GSM-Forum http://bit.ly/2GCpCOQ
via IFTTT