alcatel OT-5022X unlock done

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.9.3
Selected model: OT-5022X
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) MICRON 0x50314a39354b
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A39354B : 00000000000000
EMMC UA SIZE: 0x1d3000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d3600000 [7.303 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM41)
MODEL FROM PROINFO: 5022X-2ATWGB1-1
SECRO FROM PROINFO: LMP16X1YGBTW
OTP IMEI: 352934071711406
Reading security, wait...
SIM[1]:
Block1(N): Unlocked (remain:3) Code : 9582036564184897
Block2(NS): Unlocked
Block3(SP): Locked (remain:0) Code : 2282077725641197
Block4(C): Unlocked
[2060]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.

from GSM-Forum http://bit.ly/2C1lfdY
via IFTTT